15% OFF arrow_drop_up
Skip to content

Read: Global supply chain announcement regarding nuview gels 11/1

Join our rewards club and start earning on every purchase today

Get in touch with us

Guide to SDS-PAGE: Tips for Better Results with NuSep Precast Gels


 

Electrophoresis is a cornerstone technique used in protein research, particularly for separating and analyzing proteins based on their size. The most common form of electrophoresis used is SDS-PAGE (Sodium Dodecyl Sulfate Polyacrylamide Gel Electrophoresis).

This guide is designed to help you optimize your SDS-PAGE experiments using NuSep’s precast gels. Whether you’re a seasoned researcher or just starting out, these practical tips will help you achieve reliable, high-quality results while troubleshooting common issues.

 

SDS-PAGE (Sodium Dodecyl Sulfate Polyacrylamide Gel Electrophoresis)

Overview: SDS-PAGE is a widely used method for separating proteins based on their molecular weight. SDS, an anionic detergent, denatures proteins and imparts a uniform negative charge, allowing them to be separated primarily by size during electrophoresis.

 

 

Tips for Optimizing SDS-PAGE:

  • Gel Concentration: Selecting the correct percentage of acrylamide in your gel is crucial. Lower percentage gels (e.g., 8%) are ideal for resolving larger proteins, while higher percentages (e.g., 12-15%) are better for smaller proteins. NuSep offers a range of precast gels that cater to different protein sizes, ensuring optimal resolution.
    • Relevant Gels: Tris-Glycine gels are suitable for separating proteins with a wide range of molecular weights. 
  • Sample Preparation: Ensure thorough denaturation by boiling your samples in SDS and a reducing agent such as DTT. Proper denaturation ensures that proteins unfold completely and migrate according to their molecular weight.
  • Buffer Selection: Use a Tris-Glycine running buffer to maintain consistent results. Make sure the buffer is freshly prepared or stored properly to prevent degradation, which can affect the performance of your gels.

Shop: nUView Tris-Glycine Gels

Common Issues & Troubleshooting:

Smearing of Bands

Occurs when protein bands are not clearly defined and appear blurred or streaked across the gel. This can happen in the vertical direction (down the gel) or horizontally.

Potential Causes:

Troubleshooting:

Overloading the Gel: Excessive amounts of protein in the wells can cause smearing. Each well has a capacity, and exceeding this can lead to bands merging or smearing.

Reduce Sample Load: Try loading a smaller volume of sample or diluting your protein sample to an appropriate concentration.

Incomplete Denaturation: Proteins must be fully denatured by the SDS and reducing agent (like DTT or β-mercaptoethanol) before loading onto the gel. Incomplete denaturation results in proteins that maintain their secondary or tertiary structure, leading to irregular migration.

Ensure Complete Denaturation: Heat your samples at 95°C for 5 minutes in sample buffer containing SDS and a reducing agent. Ensure that the sample buffer is freshly prepared and that the heating step is done correctly.

Poor Sample Solubilization: If the sample is not fully solubilized, it can result in aggregated proteins, which do not enter the gel evenly.

Improve Sample Preparation: Vortex or sonicate samples to ensure they are fully solubilized before loading.

 

Incomplete Transfer (in Western Blotting)

After electrophoresis, proteins might not transfer completely from the gel to the membrane, resulting in faint or missing bands on the blot.

Potential Causes

Troubleshooting:

Insufficient Transfer Time or Voltage: Transfer conditions, including time and voltage, are critical. If these are too low, proteins may not fully transfer to the membrane.

Increase Transfer Time/Voltage: Adjust the transfer time and voltage settings according to the gel thickness and protein size. Thicker gels or larger proteins might require longer or higher voltage transfers.

Gel Thickness: Thick gels can impede the efficient transfer of proteins.

Thin the Gel: Use a thinner gel if possible, as this can improve transfer efficiency.

Ineffective Transfer Buffer: The transfer buffer must be optimized for the type of membrane and protein. Improper buffer composition can reduce transfer efficiency.

Optimize Transfer Buffer: Ensure the buffer is freshly prepared with the correct pH and includes methanol or ethanol (typically 10-20%) to facilitate protein binding to the membrane.

  

Vertical Streaking:

Occurs when there are streaks or smears extending vertically from protein bands, which can obscure results and make quantification difficult.

Potential Causes

Troubleshooting:

Salt Contamination: High salt concentrations in the sample can cause streaking. Salts can increase the conductivity of the sample, leading to uneven migration.

Desalt the Sample: Use dialysis, desalting columns, or buffer exchange methods to remove excess salts from the sample.

Partially Degraded Proteins: Proteolytic degradation of proteins can lead to the formation of smaller fragments that streak across the gel.

Use Protease Inhibitors: Add protease inhibitors during sample preparation to prevent degradation.

Uneven Gel Polymerization: If the gel does not polymerize evenly, it can cause proteins to migrate inconsistently, leading to streaking.

Ensure Proper Gel Preparation: Follow the manufacturer’s instructions carefully to ensure the gel polymerizes evenly, or consider using high-quality precast gels to avoid these issues.

 

Gel Smiling

When the bands appear curved, with the outer lanes migrating further than the central lanes, giving a smile-like appearance.

Potential Causes

Troubleshooting:

Excessive Voltage: High voltage can cause overheating, leading to uneven migration across the gel.

Reduce Voltage: Lower the voltage to prevent overheating, especially when running small or delicate gels.

Uneven Heat Distribution: If the gel heats unevenly during the run, it can cause the outer lanes to run faster than the inner lanes.

Run the Gel Slowly: Allow the gel to run at a slower pace, which can help maintain an even temperature.

Improper Cooling: Lack of sufficient cooling during the run can lead to temperature gradients across the gel.

Use Cooling Systems: If available, use a cooling system to maintain consistent temperatures throughout the run.

 

Buffer Optimization

Overview: Buffers play a crucial role in maintaining the pH and ionic strength necessary for accurate and consistent electrophoresis results. Using the correct buffer and maintaining its integrity throughout the experiment is essential for achieving high-quality separations.

Tips for Buffer Use:

  • Fresh Preparation: Always use freshly prepared buffers, or ensure stored buffers have been kept under appropriate conditions. Buffers can degrade over time, especially if not stored properly, leading to pH drift or precipitation that can affect your results.
  • Proper pH: The pH of your running buffer is critical for maintaining protein stability during electrophoresis. For SDS-PAGE, the Tris-Glycine buffer should be at pH 8.3. Regularly check the pH and prepare fresh buffer if needed.
  • Buffer Recycling: While it may be tempting to reuse buffers to save costs, doing so can introduce contaminants or result in pH changes that negatively impact protein separation. If you must reuse buffers, monitor their pH and conductivity closely

Common Issues & Troubleshooting:

  • pH Drift: If the pH of the buffer drifts during electrophoresis, it can affect protein migration and band resolution. Regularly check the pH of the buffer and prepare a fresh solution if necessary.
  • Buffer Precipitation: Ensure that buffers are fully dissolved and free of particulates before use. Precipitation can interfere with electrophoresis by clogging the gel matrix or affecting conductivity. Filter the buffer if needed to remove any particulates.

Shop: 5L SDS Gel Running Buffer

Shop: SingleShot TGS Buffer

Conclusion

By focusing on optimizing SDS-PAGE techniques and ensuring proper buffer preparation and usage, you can achieve high-quality, reproducible results in your protein research. NuSep’s precast gels, combined with best practices in electrophoresis, can help you obtain consistent and accurate data, advancing your research goals.

Explore our full range of precast gels and buffers here to find the perfect products for your research needs.